Overview - Seat Angle Adjuster
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Handle
- for seat inclination adjustment
- Removing and installing. Refer to SEAT ANGLE ADJUSTMENT HANDLE, REMOVING AND INSTALLING .
- Clip
- Replace the seat angle adjustment handle each time it is removed
- Installed position. Refer to Installing - "The springs -arrows- (quantity: 2) on the clip -2- must be on the inner side of the lever -1-" (See Figure)
- Bolt
- 6.5 Nm
- Self-locking
- Always replace if removed
- Threaded holes for screws must always be cleaned, for example, with thread cutter
- Shoulder Pin
- Self-locking
- Always replace if removed
- Threaded holes for screws must always be cleaned, for example, with thread cutter
- 6 Nm
- Seat Angle Adjuster
- Removing and installing. Refer to SEAT ANGLE ADJUSTER, REMOVING AND INSTALLING .