Seat Angle Adjustment Handle, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
-- Replace the clip on the seat height adjustment handle. Note the installation position.
-- Make sure the seat height adjustment handle engages correctly with the clips.
- The springs -arrows- (quantity: 2) on the clip -2- must be on the inner side of the lever -1- .