Diagnostic Data, Gathering

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

In order to record all the diagnostic data, it is necessary to start and complete the Guided Fault Finding correctly.

Do not disconnect the connection to the vehicle before the procedure is complete.

-- Connect the vehicle diagnostic tester. Refer to VEHICLE DIAGNOSTIC TESTER, CONNECTING .

-- Perform the following on the diagnostic tester:

Guided Fault Finding
VIN
Perform vehicle system test

-- Continue following the tester procedure.

Before forwarding to fault finding:

Go To
End

-- Send the diagnostic log online.

-- Continue to follow the procedure on the tester until the confirmation that the online log has been sent.

NOTE:

It is necessary to have a working network connection in order to send the log online.

Any DTC memory entries are erased.