Vehicle Diagnostic Tester, Connecting

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

Always secure the testing and measuring equipment on the rear seat when performing a road test.
Drivers must NEVER operate these tools while driving.

Special tools and workshop equipment required

Vehicle Diagnostic Tester

Fig 1: Identifying VAS 5052 Vehicle Diagnostic And Service Information System
Courtesy of AUDI OF AMERICA, LLC
Or: Diagnostic Laptop VAS 6150 B
Diagnostic Cable For VAS5052 (5 meter) VAS 5052/3 A

Fig 2: Diagnostic Cable For VAS 5052 (5 Meter) VAS 5052/3 A
Courtesy of AUDI OF AMERICA, LLC
Remote Diagnosis Head VAS 5054A
Diagnosis Interface VAS 5055
USB Bluetooth Adapter VAS 5054/2

NOTE:

Make sure the selected Vehicle Diagnostic Tester is only used with the accompanying diagnostic cable.

Perform the Following Procedure:

Fig 3: Identifying Diagnostic Cable Connector

Courtesy of AUDI OF AMERICA, LLC

-- Connect the diagnostic cable connector to the diagnostic connection.

-- Switch on the Vehicle Diagnostic Tester.

-- Switch on the ignition.

-- Follow the touch screen menu to start the function you want.