Secondary Air Injection Left Combination Valve, Removing And Installing, Market-Specific 1: Installing

WARNING: This page is about a different car, the 2009 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Tightening specification. Refer to OVERVIEW - SECONDARY AIR SYSTEM, MARKET-SPECIFIC 1 and Figure.

Install in reverse order of removal. Note the following:

NOTE:

Replace the seal.

-- Install the left catalytic converter: for vehicles with manual transmissions. Refer to LEFT CATALYTIC CONVERTER, REMOVING AND INSTALLING . For vehicles with the multitronic 0AW or automatic transmission 0B6. Refer to LEFT CATALYTIC CONVERTER, REMOVING AND INSTALLING .

-- Install the plenum chamber bulkhead. Refer to OVERVIEW - BULKHEAD .