Transmission Mount, Removing And Installing: Installing
WARNING: This page is about a different car, the 2010 Audi A4 and 2009 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Tightening specifications. Refer to OVERVIEW - SUBFRAME MOUNT .
-- Mount the transmission support -3- on the transmission mount -5-.
-- Tighten the nut -4- hand-tight.
-- Tighten the lower stop -2- with the bolts -1-.
-- Tighten the nut -4-.
-- Install the transmission support and transmission mount. Refer to TRANSMISSION SUPPORT WITH TRANSMISSION MOUNT, REMOVING AND INSTALLING .