Overview - SUBFRAME Mount
WARNING: This page is about a different car, the 2010 Audi A4 and 2009 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Nut
- 20 Nm
- Only remove if the transmission mount must be separated from the transmission support
- Bolt
- 70 Nm
- Bolt
- 40 Nm
- Nut
- 20 Nm
- Transmission Support
- Removing and installing. Refer to TRANSMISSION SUPPORT WITH TRANSMISSION MOUNT, REMOVING AND INSTALLING
- Transmission Mount
- Removing and installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING
- Lower Stop
- For the transmission mount
- Bolt
- 20 Nm + 90° turn
- Replacing
- Only remove if the transmission mount must be separated from the transmission support
- Tunnel Crossmember
- Removing and installing. Refer to TUNNEL CROSSMEMBER, REMOVING AND INSTALLING