Right Seal, Replacing: Installing
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2015 Audi S4, 2015 Audi A4 Quattro, and 2014 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
-- Lightly coat the outer circumference of the new shaft seal with oil.
-- Install the new right flange shaft seal all the way without tilting it.
-- Fill the space between the sealing and dust lip halfway with Sealing Grease G 052 128 A1.
-- Install the right flange shaft. Refer to REMOVING AND INSTALLING - "Install The Right Flange Shaft".
-- Fill transmission fluid in transmission and check the fluid level. Refer to TRANSMISSION FLUID LEVEL, CHECKING . Remove the oil filler plug -arrow- to do this.