Transmission Fluid Level, Checking
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2016 Audi S4, 2015 Audi S4, 2014 Audi S4, 2013 Audi A4, and 2012 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Procedure
NOTE:
The vehicle must be level when checking the transmission fluid level.
-- If equipped remove the rear noise insulation -2-. Refer to NOISE INSULATION, REMOVING AND INSTALLING .
-- Remove the transmission fluid filler plug -arrow- to check transmission oil.
- Specified value: The level is correct when the transmission fluid comes up to the bottom edge of oil filler hole.
-- Add transmission fluid, if necessary. Specification. Refer to TECHNICAL DATA .
-- Install the transmission fluid filler plug.
Tightening Specification
| Component | Nm |
|---|---|
| Transmission fluid filler plug | 45 |