Suction Line, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Follow all safety precautions. Refer to SAFETY PRECAUTIONS .

-- Follow the guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .

-- Remove the fuel delivery unit. Refer to FUEL DELIVERY UNIT/FUEL LEVEL SENSOR, REMOVING AND INSTALLING .

-- Remove the Fuel Level Sensor 2 -G169-. Refer to Fuel Level Sensor 2 -G169-, REMOVING AND INSTALLING .

-- Carefully remove the Fuel Level Sensor 2 -G169- -3- with the suction line -1- from the fuel tank opening.

Fig 1: View Of Fuel Suction Line -1-, Connector -2- And Fuel Level Sensor 2 -G169- -3-

Courtesy of AUDI OF AMERICA, LLC

NOTE:

When removing, do not bend the floater arm on the Fuel Level Sensor 2 -G169-.

-- Disconnect the connector -2- by pressing the release in direction of -arrow A-.

-- Press the bracket together with needle nose pliers in direction of -B arrows- and remove the suction line.