LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 529 (Fuel Supply - Engine Code(S): CAEB, CAED, CALA, CCBA, CGXC, CPMA, CPMB & CTUB (Sedan)) >> 20 Fuel Supply >> Accelerator Mechanism >> Accelerator Pedal Position Sensors -G79- / -G185-, Removing And Installing >> Removing

Accelerator Pedal Position Sensors -G79- / -G185-, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Accelerator Pedal Position Sensor
GWWA20-10380Courtesy of AUDI OF AMERICA, LLC

-- Remove the lower instrument panel cover on the driver side. Refer to COMPONENT LOCATION OVERVIEW - STORAGE COMPARTMENT/COVERS .

-- Disconnect the connector -2- by pressing the release -1- up in direction of -arrow-.

-- Remove the bolt -3- and remove the accelerator pedal module downward.

scientia non olet · About LEMON Manuals