Drive Plate, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi A4 Quattro, 2014 Audi A4 Quattro, and 2013 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Transmission removed. Refer to TRANSMISSION, REMOVING AND INSTALLING (0B6) or TRANSMISSION, REMOVING (0BK), TRANSMISSION, INSTALLING (0BK).

Insert the -10-201- to loosen the bolts.

NOTE: Risk of Damaging the Drive Plate by Using an Unsuitable Tool

When loosening and tightening the bolts, do not damage the drive plate centering flange.
Remove the drive plate bolts -1- using an internal multi-point socket with at least a 40 mm shaft length.