Transmission, Securing In Engine/Transmission Holder
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Audi A4 Quattro, 2015 Audi A4 Quattro, 2014 Audi A4 Quattro, 2013 Audi A4, and 2012 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Holding Plate VW 309
- Hook and Support Tool 3311 with Bolt 3311/1
- Engine and Transmission Holder VAS 6095
Procedure
- Transmission secured with the VAS 6100, refer to TRANSMISSION, TRANSPORTING .
-- Install the VW 309 on the 3311.
-- Place the transmission into the VAS 6095 using the VAS 6100.
NOTE:
The vents for the transmission housing and final drive must be closed before turning a filled transmission with ATF pan upward on the engine/transmission holder.