Headlamp, Removing And Installing, Halogen Headlamps (From My 2013): Installing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Headlamp Housing (From MY 2013)

Courtesy of AUDI OF AMERICA, LLC

Tightening specification: Refer to OVERVIEW - HEADLAMP, HALOGEN HEADLAMPS FROM MY 2013 .

Install in reverse order of removal. Note the following:

-- When inserting the headlamp -2- into the mount -1-, make sure the guide tracks on the headlamp engage in the guides on the mount -arrows-.

Headlamp must slide gently into mount and without using force.

-- When sliding the headlamp -4- in, make sure the headlamp ventilation -3- slides evenly into the mount -2- for the ventilation hose -1- -arrow-.

Fig 2: Identifying Headlamp -4-, Headlamp Ventilation -3-, Mount -2- And Ventilation Hose -1- -Arrow-

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts -1, 3 and 4- and -arrows-.

Fig 3: Removing/Installing, Headlamps (From MY 2013)

Courtesy of AUDI OF AMERICA, LLC

-- Install the lock carrier cover. Refer to LOCK CARRIER COVER, REMOVING AND INSTALLING .