Bumper Cover, Removing And Installing, AUDI RS 4: Installing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Refer to OVERVIEW - BUMPER COVER, AUDI RS 4 .

Install in reverse order of removal. Note the following:

-- Install the tail lamps. Refer to TAIL LAMPS .

NOTE:

Versions with lane change assistance: If the bumper cover was removed, the lane change assistance must be calibrated. Refer to TAIL LAMPS .