Tail Pipe Trim, Removing and Installing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Removing

-- Remove the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING, AUDI RS 4 .

-- Remove the bolts -arrows-.

-- Remove the tail pipe trim -1- inward from the bumper cover.

Fig 1: Exhaust Pipe Trim (1 Of 2)

Courtesy of AUDI OF AMERICA, LLC

Installng

Fig 2: Exhaust Pipe Trim (2 Of 2)

Courtesy of AUDI OF AMERICA, LLC

Refer to OVERVIEW - BUMPER COVER, AUDI RS 4 .

Install in reverse order of removal. Note the following:

-- Check the trim distance for the tail pipe -2- on the bumper cover -1- :

Dimension -x- = uniform gap.

-- Install the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING, AUDI RS 4 .