LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 486 (Bumpers (Sedan)) >> 63 Bumpers >> Front Bumper >> Impact Member, Removing And Installing >> Impact Absorber, Removing And Installing, Vehicles From My 2013 >> Installing

Impact Absorber, Removing And Installing, Vehicles From My 2013: Installing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- Audi RS 4: Install the air ducts. Refer to OVERVIEW - LUGGAGE COMPARTMENT RELAY/FUSE CARRIER AND CONTROL MODULES .

-- Install the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals