Overview - Impact Absorber, Vehicles From My 2013
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Horn
- Removing and Installing. Refer to High Tone Horn -H2- /Low Tone Horn -H7-, REMOVING AND INSTALLING .
- Impact Member
- Removing and installing. Refer to IMPACT ABSORBER, REMOVING AND INSTALLING, VEHICLES FROM MY 2013 .
- Rivet
- Quantity: 2
- Counterholder
- For mount with adjusting mechanism
- Removing and installing. Refer to BUMPER COVER MOUNT COUNTERHOLDER, REMOVING AND INSTALLING .
- Bolt
- Quantity: 2
- Nut
- 4 Nm
- Impact Member Bracket
- Removing and installing. Refer to IMPACT MEMBER BRACKET, REMOVING AND INSTALLING, VEHICLES FROM MY 2013 .
- Bolt
- 55 Nm
- Quantity: 3
- Nut
- 20 Nm
- Quantity: 2
- Nut
- Tightening specification: 9 Nm .