Carpet, Removing And Installing: Removing
-- Remove the front seat:
- Standard seat and Sport seat (manual). Refer to FRONT SEAT, REMOVING AND INSTALLING, MANUAL .
- Standard and Sport Power Seat, Comfort Seat and Super Sport Seat. Refer to FRONT SEAT, REMOVING AND INSTALLING, POWER .
- Bucket seat. Refer to FRONT SEAT, REMOVING AND INSTALLING, RS BUCKET SEAT .
-- Remove the bench seat. Refer to SEAT BENCH/SINGLE SEAT, REMOVING AND INSTALLING .
-- Remove the instrument panel cover on the driver side. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .
-- Remove the center console. Refer to CENTER CONSOLE, REMOVING AND INSTALLING .
-- Remove the center console bracket and lower the shift mechanism. Refer to CENTER CONSOLE BRACKET, REMOVING AND INSTALLING .
-- Remove the rear center console vent on the center tunnel. Refer to Air Conditioning .
-- Remove the front sill panel strip. Refer to SILL PANEL STRIP, REMOVING AND INSTALLING, FRONT SILL PANEL .
-- Remove the rear sill panel strip. Refer to SILL PANEL, REMOVING AND INSTALLING, REAR SILL PANEL .
-- Remove the B-pillar lower trim piece. Refer to B-PILLAR TRIM PANEL, REMOVING AND INSTALLING, LOWER B-PILLAR TRIM PANEL .
-- Disengage the floor covering at brackets -1- and -2-.
-- Pull the floor covering -3- back.
Make sure the floor covering does not tear at the openings.
-- Fold the floor covering lengthwise and remove it through a door.