SUBFRAME Without Steering Gear, Removing And Installing: Notes
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Torque Wrench 1332 40-200Nm VAG1332
- Engine Support Bridge 10-222A
- Engine Support Supplement Set T40093A, needed depending on the engine. The exact description for engine support. Refer to ENGINE, REMOVING AND INSTALLING for engine CALA, ENGINE, REMOVING AND INSTALLING for engines CAED, CAEB, CPMB, CPMA, or ENGINE, REMOVING AND INSTALLING for engines CCBA, CGXC, CTUB .
- Engine and Gearbox Jack VAS6931
- Engine/Gearbox Jack Adapter - Wheel Hub Support T10149
- Tensioning Strap T10038
The following tools can be used on all engine versions. The instructions for each engine describe the tools needed for that particular engine. Refer to OVERVIEW - SUBFRAME MOUNT for engine CALA, OVERVIEW - SUBFRAME MOUNT for engines CAED, CAEB, CPMB, CPMA, or OVERVIEW - SUBFRAME MOUNT for engines CCBA, CGXC, CTUB .