Overview - SUBFRAME Mount

Fig 1: Identifying Subframe Mount Assembly Overview

Courtesy of AUDI OF AMERICA, LLC

1. Bolt
   • 20 Nm
2. Retaining Plate
   • For the engine mount
   • If the engine mount is faulty, replace the retaining plate
   • Check the retaining plate on the opposite side; replace if necessary.
3. Bolt
   • 40 Nm
4. Engine Support
5. Bolt
   • 10 Nm
6. Heat Shield
7. Bolt
   • 90 Nm +90° turn
   • Replace
8. Engine Mount
   • Removing and installing. Refer to LEFT ENGINE MOUNT, REMOVING AND INSTALLING  for left side and RIGHT ENGINE MOUNT, REMOVING AND INSTALLING  for right side.
   • Replace in pairs
9. Subframe
10. Bolt
    • 55 Nm

Fig 2: Identifying Hydraulic Oil Hose Bracket & Nut

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the nut -2- for the hydraulic fluid hose bracket -1- to 9 Nm.