Glove Compartment Lid, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing Glove Compartment Lid

Courtesy of AUDI OF AMERICA, LLC

-- Remove the glove compartment. Refer to GLOVE COMPARTMENT, REMOVING AND INSTALLING .

-- Remove the hinge pin from the brake component. Refer to Removing -1- (See Figure).

-- Set the glove compartment down with the top side on a soft surface.

-- Drive the left and right hinge pins out using a 4 mm hex socket wrench -item 1- (or another suitable tool) -arrow-.

-- Remove glove compartment cover -2- from the glove compartment.