Fan for E-Box in plenum chamber, removing and installing
WARNING: This page is about a different car, the 2002 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
E-box plenum chamber may be equipped with a fan motor, depending on vehicle equipment.
Removing
- Remove E-box plenum chamber. Refer to E-Box in plenum chamber, removing and installing .
- Remove bolts -4- and detach fan -2- with air duct -3-.
Installing
Installation is the reverse of removal.
Tightening torque
| Component | Nm | |
| Fan to E-box plenum chamber | 3 | |