Light bulb for high beam, replacing

WARNING: This page is about a different car, the 2002 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

Removing

Remove headlight. Refer to Headlights, removing and installing: .
Remove housing cover from headlight housing.

Fig 1: Rotating Light Bulb Counter Clockwise And Disconnecting Electrical Harness Connector

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Rotate light bulb counter clockwise -arrow- and remove it from headlight housing.
Disconnect electrical harness connector -1- at bulb.

Installing

Installation is reverse of removal, paying attention to the following:

Do not touch glass portion with bare hands.
Secure light bulb by turning clockwise.
Secure housing cover using wire clamp.
Install headlight. Refer to Installing .