Headlight washer system spray jets, removing and installing

WARNING: This page is about a different car, the 2002 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

Removing

Fig 1: Pulling Up On Spray Jet Covers At Bumper And Carefully Disengaging Mounts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Pull spray jet covers upward at bumper and carefully disengage mounts -arrow-.
Remove the respective headlight. Refer to Headlights, removing and installing: or Headlights, removing and installing: .

Fig 2: Identifying Washer Fluid Hose, And Spray Jet Bolts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove washer fluid hose -3- (press release button).
Unscrew bolts -1- and -2- and remove spray jet.

NOTE: Illustration is shown with bumper removed.

Installing

Installation is reverse of removal, paying attention to the following:

Install headlight. Refer to Installing or Installing .

Tightening torque

Component	Nm
Spray jet to bumper	3