Electronics box fan in plenum chamber, removing and installing

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Depending on market version, the plenum chamber electronics box may be equipped with a fan motor.

Removing

Remove the electronics box (plenum chamber) → Electronics box in plenum chamber, removing and installing .

Fig 1: Identifying Bolts, Fan, And Air Duct

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove screws - 4 - and remove fan - 2 - with air cowl - 3 - from electronics box in plenum chamber - 1 -.

Installing

Install in reverse order of removal.

Tightening torque

Component	Nm
Fan to plenum chamber electronics box	3