Refrigerant lines for condenser, removing and installing: Disconnecting
WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Discharge refrigerant circuit → Discharge refrigerant circuit .
- Remove noise insulation →
- 50 BODY, FRONT
- 50 - BODY - FRONT for BODY EXTERIOR - CABRIOLET
- Remove entire front bumper → 63 - BUMPERS for BODY EXTERIOR - CABRIOLET.
- Remove bolts - A - (tightening torque 20 Nm).
- Remove refrigerant lines from condenser.
NOTE:
- Seal open lines and connections at condenser with suitable caps (to prevent dirt and moisture).