Insulation, assembly overview
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
1 - Insulation with loudspeaker installed
2 - Insulation with loudspeaker not installed
3 - Insulation
4 - Belt reel insulation
- Removing
- Remove rear bench seat → Rear seat bench, assembly overview .
- Remove rear seat backrest → Rear seat backrest, assembly overview .
- Remove decorative panel → Rear side trim, assembly overview .
- For belt reel insulation: Remove belt reel of front seat belt → Front 3-point seat belt with belt tensioner, assembly overivew .
- For all insulation: When removing insulation, ensure that insulation does not become damaged.
- Remove insulation.
- Installing
- Press insulation evenly and firmly onto body.
- For belt reel insulation: Install belt reel → Front 3-point seat belt with belt tensioner, assembly overivew .