Cleaning when soiled by adhesive sealing material
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Adhesive removal solution D 002 000 10 is the recommended cleaning solution. Observe safety precautions when processing.
CAUTION:
When cleaning from vehicle interior out, the window just installed must not be pressed outward.
Paint surfaces
- First, clean paint surfaces with a dry cloth. Remove further material using adhesive removal solution D 002 000 10 .
Plastic trim
- Allow adhesive sealing material to harden (about 1 hour) and then peel off.