Rear window regulator - assembly overview
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
1 - Side panel
2 - Retaining strip
3 - Nuts
- 8 Nm
4 - Side window
- Removing and installing → Side windows - assembly overview .
5 - Window regulator
- Removing → Rear window regulator, removing and installing .
6 - Adjustment screw
- 3x
- 20 Nm
- Side Window Installation Tool V.A.G 1739 is needed for adjusting.
- Angle of side window can be adjusted using these screws.
7 - Nut
- Union nut
- 20 Nm
8 - Screw
- Qty. 4
- 8 Nm