Door window, removing and installing

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Removing

Remove door trim →
- 70 - INTERIOR TRIM
- 70 - INTERIOR TRIM for BODY INTERIOR - CABRIOLET
.
Remove inner shaft strip.
Run window all the way up.

Fig 1: Door Window Remove/Install Components

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Loosen clamping bracket connection - 1 -.
Remove bolt - 2 - and remove fastener - 4 - and pressure plate - 5 -.
Remove window - 3 - upward.

Installing

Installation is reverse of removal.

After installing, check window adjustment → Door window, adjusting .

Tightening torques → Door window - assembly overview .