Stop buffer, adjusting
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Open rear lid.
- Remove rubber cap.
- Screw in buffer stops until they reach stop.
- Unscrew stop again in steps.
- Press rubber cap on.
- When adjusted correctly and with lid closed, buffer stops must make contact lightly on luggage compartment edge.