Gas-filled strut, removing and installing: Notes
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Support hood or secure it from falling down.
- Gently lift retaining springs - arrow - at both ends of gas-filled strut using a screwdriver and unclip gas-filled strut.
- To install, press gas-filled strut onto ball stud and engage.
- Install with tube end of strut at body.