Noise insulation panel - assembly overview
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
1 - Quick release screw
- Only loosen these quick release screws for lock carrier service position.
- Qty. 3
2 - Noise insulation, front
3 - Wheel spoiler
4 - Quick release screw
- Qty. 3
5 - Noise insulation panel rear
- Installed only with specific engine versions.
6 - Quick release screw
- Qty. 2
7 - Noise insulation mount
- Marking (recess) must point to left vehicle side.
8 - Screw
- 7 Nm
- Qty. 2
9 - Spring nut
- Qty. 3
10 - Spring nut
- Qty. 2
11 - Clamping pin
- Qty. 6
12 - Wheel housing liner
13 - Bumpers
14 - Lock carrier with attachments