Remove and install end plate

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Remove And Install End Plate

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Front wheel removed.
Wheel housing liner removed.

Unscrew bolts - 1 - from expanding clip - 3 - and remove end plate - 2 - from fender - 4 -.

1 - Screw (2 Nm)