Coupling rod for stabilizer bar, removing and installing
WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Removing
- Remove wheel.
- Remove bolts - 1 -.
- Remove bolts - 2 -. Counterhold joint with open-end wrench.
- Remove connecting link.
Installing
Installation is in reverse order of removal.
Torque specifications → Part VI, Stabilizer bar