Ignition key removal lock, checking
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2009 Audi A4, 2008 Audi S4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition key to "ignition on" position.
- Press and hold brake pedal.
- When button in selector lever handle is pressed, it should be possible to move selector lever out of position "P" without "catching".
- It should not be possible to remove the ignition key when the selector lever is in any position other than "P".
- Shift selector lever to position "P".
- It should be possible to move ignition key to removal position without "sticking".
- Pull out ignition key.
- It should only be possible to remove ignition key in selector lever position "P".
- Selector lever cannot be shifted out of "P" position with button pressed and foot brake depressed.
If ignition key removal lock does not function as described, locking cable has to be adjusted → Locking cable, adjusting .