Reversing light switch, removing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2007 Audi S4, 2007 Audi RS 4, and 2006 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

Special tools, testers and auxiliary items required

Fig 1: Identifying Torque Wrench V.A.G. 1331

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Torque wrench V.A.G 1331

Fig 2: Front And Rear Sound Insulation And Fasteners

Courtesy of VOLKSWAGEN UNITED STATES, INC.

If installed, loosen quick release fasteners - 3 - and remove rear noise insulation - B -.

Fig 3: Disconnecting Harness Connector For Back-Up Light Switch At Right Of Transmission

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Disconnect connector - arrow - for reversing light switch on right side of transmission.
Unscrew reversing light switch - arrow - from selector shaft cover.