Over-center spring, removing and installing: Installing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2007 Audi S4, 2007 Audi RS 4, and 2006 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
- Pull clutch pedal into the passenger compartment.
- Installation position of over-center spring: black side of over-center spring faces clutch pedal.
- Install over-center spring with assembly clamp T40025, operate clutch pedal and remove assembly clamp.