Determining thickness of circlip for synchronizing hub for 3rd and 4th gear

WARNING: This page is about a different car, the 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Determining Thickness Of Circlip

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Press synchronizing hub onto stop.

Determine thickest circlip that will just fit and install it. For Part No.

The following circlips are available:

Circlip thickness (mm)
1.90	1.96	2.02
1.93	1.99	2.05