LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (6-Speed Manual Transmission 01X, Front-Wheel Drive) >> 34 Controls, housing >> Bearing housing, servicing >> Bearing housing, servicing >> Pulling front ball sleeve out of reverse gear selector rod

Pulling front ball sleeve out of reverse gear selector rod

WARNING: This page is about a different car, the 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Pulling Front Ball Sleeve Out Of Reverse Gear Selector Rod
GW00019017Courtesy of VOLKSWAGEN UNITED STATES, INC.

A - Counter-support, e.g. Kukko 22/1

B - Internal puller 14.5 to 18.5 mm, e.g. Kukko 21/2

scientia non olet · About LEMON Manuals