Determining thickness of circlip
WARNING: This page is about a different car, the 2005 Audi A4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of VOLKSWAGEN UNITED STATES, INC.
- Synchro-hub pressed onto stop
- Determine the thickest circlip that will just fit and install it.
NOTE:
The opening of circlip must align with groove in synchro-hub.
The following circlips are available:
| Circlip thickness (mm) |
| 1.90 |
1.96 |
2.02 |
| 1.93 |
1.99 |
2.05 |