Installation position of circlips
WARNING: This page is about a different car, the 2005 Audi A4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Circlips -1- and -2- secure the input shaft ball bearing Adjusting input shaft: Refer to Input shaft, adjusting .
- Circlip -3- secures the 3rd and 4th gear synchro-hub.
Thickness 2.00 mm. Identification: Brown color.
- Circlip -4- secures the 3rd and 4th gear synchro-hub.
Determining thickness table on. Refer to Available circlips for 3rd and 4th gear synchro-hubs
- Circlip -5- secures the 5th gear wheel.
Determining thickness table on. Refer to Available circlips for 5th gear wheel .