Right Engine Mount: Installing

WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, and 2010 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

Tightening specifications, refer to SUBFRAME MOUNT OVERVIEW .

NOTE:

Replace bolts that are tightened to the specification.

Vehicles with S-Tronic Transmission 0B5

-- Install ATF lines. Refer to Removal and Installation .

All Vehicles

-- Install the front wheel housing liner and noise insulation. Refer to WHEEL HOUSING LINER and NOISE INSULATION .

-- Install the front wheel. Refer to WHEELS AND TIRES .