Left Engine Mount: Installing
WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, and 2010 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
Tightening specifications:
NOTE:
Replace bolts that are tightened to the specification.
-- Tighten the subframe. Refer to OVERVIEW - SUBFRAME .
-- Install A/C compressor. Refer to OVERVIEW - A/C COMPRESSOR POWER UNIT .
-- Install the oil cooler. Refer to ENGINE OIL COOLER .
-- Install the noise insulation. Refer to NOISE INSULATION .