Bearing Flange With Bearing F And 11, Replacing: Installing
WARNING: This page is about a different car, the 2014 Audi A5, 2013 Audi A5, 2012 Audi A5, and 2011 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- Tightening specifications. Refer to OVERVIEW - .
-- Check if the alignment pin -1- and the alignment sleeve -2- are inserted, and insert if necessary.
-- Insert the bearing flange -1- and tighten the bolts -arrows-.