LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1263 (Wiring (General Information)) >> 97 Wiring >> Wiring Harness And Connector Repairs >> Contact Housings, Releasing And Disassembling >> Primary Lock

Primary Lock

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

The primary lock is the locking mechanism of an individual crimp contact in the contact housing.

If necessary, housing securing mechanisms (secondary locks) must be released or removed using specified tool before releasing the contacts. Refer to SECONDARY LOCK .

The shapes of the primary locks depicted in the following are only a selection which, as an example, should make clear the various functions of the primary lock.

The allocation of the correct release tool for the respective locks can be found in the table in the :VAS1978/35  Operating Instructions.