LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1258 (Hood, Lids) >> 55 Hood, Lids >> Rear Lid >> Adjusting Buffer, Removing And Installing >> Installing

Installing

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

-- Check the stop -4- for proper seating in the side panel -3-.

-- For installation, insert the entire buffer -1- in the right bracket in the side panel in direction of -arrow c-.

-- Screw in the buffer -1- 90° to the right in direction of -arrow b-.

-- Adjust the adjustment buffer -1-. Refer to ADJUSTING BUFFER, ADJUSTING 

scientia non olet · About LEMON Manuals