Complete The Adjustment:
WARNING: This page is about a different car, the 2012 Volkswagen Touareg and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
-- Tighten the bolts -1, 2 and 3- to 10 Nm.
-- Press the v button -item 4- to continue.
Display on the E-Box:VAS6395/1A :
- X, XXX V
- [OK]
-- Remove the E-Positioner Service Kit - Bracket:VAS6395/5
-- Press the v button -item 4- to continue.
- The Turbocharger Control Module 1 -J724- goes to the end points.
NOTE:
If "FAULT" appears in the display, then replace the new Turbocharger Control Module 1 -J724-. Refer to INSTALL THE NEW TURBOCHARGER CONTROL MODULE 1 -J724- IN REVERSE ORDER OF REMOVAL. .
Display on the E-Box:VAS6395/1A :
- [OK]
- The adjustment is complete.
-- Disconnect the connector for the E-Box:VAS6395/1A .
Assembly is performed in reverse order.