LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1244 (Exhaust System, Emission Controls [CATA]) >> 26 Exhaust System, Emission Controls >> Exhaust System Components >> Exhaust Gas Temperature Sensor >> Exhaust Gas Temperature Sensor 4 -G648-, REMOVING AND INSTALLING >> Installing

Exhaust Gas Temperature Sensor 4 -G648-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2012 Volkswagen Touareg and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal while noting the following:

NOTE:

Coat the Exhaust Gas Temperature Sensor 3 -G495- threads with hot bolt paste. For the correct hot bolt paste. Refer to the Parts Information.

-- Install the noise insulation. Refer to OVERVIEW - NOISE INSULATION .

scientia non olet · About LEMON Manuals